Step-by-Step Guide to Jailbreak iPhone 3G using QuickPwn (Windows)

2456

Comments

  • Jesse
    Jesse Posts: 38
    via Wordpress

    froze first time. worked second time. good UX design!

    Share on FacebookShare on Twitter
  • Steve
    Steve Posts: 326
    via Wordpress

    Im having a problem with mine.

    Basically when i first done it, it didnt work. After jailbreaking it it would reboot.

    So i restored it to factory settings.

    Now i try to jailbreak it and it stays stuck on step 7 (when you suppose to hold down home button for 5 secs .. ect). It stays stuck on "wait for your iphone to connect to recovery mode).

    So i have to keep resetting it back to factory settings. Any1 know what the problem is and how i can fix it.

    Thanks

    Share on FacebookShare on Twitter
  • Steve
    Steve Posts: 326
    via Wordpress

    Sorry i meant it wouldn't reboot.

    Share on FacebookShare on Twitter
  • Shawn
    Shawn Posts: 39
    via Wordpress

    Help Please!!
    i installed quickpwn 2.2 on iphone and went through all the steps. After the last step #10. It says to standby while it reboots and your all done. Well my iphone looks like it wants to reboot, but i only get a black screen with white apple and at times vibrates. (I now have restored it to original setting.) What am i doing wrong?

    Share on FacebookShare on Twitter
  • Yogesh
    Yogesh Posts: 3
    via Wordpress

    hi, Dev
    Thanx for the yellowsnow works perfect. bit now i have problem that my cell shows no sim whats the problem

    Share on FacebookShare on Twitter
  • rahul doshi
    rahul doshi Posts: 1
    via Wordpress

    hi, dev thnx for the yellowsnow. I got my iphone 3g unlocked it was working fine but suddenly started showing no sim. What has gone wrong plz tell me and what should i do now plz plz plz help me

    Share on FacebookShare on Twitter
  • slicktop
    slicktop Posts: 1
    via Wordpress

    I'm LOVIN it! Guys, if you're on the fence on using either this or ziphone, go with THIS guide, DO WHAT IT SAYS without skipping steps, and you'll be done. I tried jailbreaking my brand new 3G on Saturday with ziphone...notice I said TRIED...after having to restore, re-sync, etc, I was back to an OTB iPhone. No disrespect to Zibri, I ziphone'd my 2G with no problems, but it killed my 3G. I was hesitant after the drama but tried this method, and two minutes later I'm all set. Thanks for the walk thru guys, and thanks to the DEV team! Another iPhone set free!

    Share on FacebookShare on Twitter
  • jv
    jv Posts: 5
    via Wordpress

    i successfully installed quickpwn but my iphone does not boot. need help:(

    Share on FacebookShare on Twitter
  • John
    John Posts: 790
    via Wordpress

    I have a problem always it remains in wait to that your iphone .... since I do in order that it goes on to the following step? I need help ... I have an iphone 3g 16 gigas and everything what it puts in the tutorial is had by me

    Share on FacebookShare on Twitter
  • John
    John Posts: 790
    via Wordpress

    hello and been reading this post and I have a problem ... I try to always look to do the jailbreak I stay in one place ....." wait for your iphone ....."and nothing more .. someone can explain that I can do ... and because I put everything in the tutorial ... but I am missing something .. please if someone knows the answer tell me

    Share on FacebookShare on Twitter
  • Malcolm
    Malcolm Posts: 2
    via Wordpress

    Hi guys, i've a problem when trying to jailbreak iphone 3g using Quickpwn (windows).. i couldn't launch QuickPwn22-1 as there is an error windows that pops up when i try to run it..

    The window says "QuickPawn.exe - .NET Framework Initialization Error", and says "To run this application, you must first install one of the follwing versions of the .NET Framework: v2.0.50727. Contact your application publisher for instrcutions about obtaining the appropriate version of the .NET Framework"

    Can anyone kindly direct me on how to go about solving this problem? Thanks a million!

    THANKS!
    mal

    Share on FacebookShare on Twitter
  • iPhoneHacks
    iPhoneHacks Posts: 2,315
    via Wordpress

    @Malcom,

    You need to install .Net Framework runtimes and associated file for Quickpwn to work. You can download it from Microsoft's site: http://www.microsoft.com/downloads/details.aspx?familyid=0856eacb-4362-4b0d-8edd-aab15c5e04f5&displaylang=en

    Hope it helps. We have also updated the post for the benefit for other readers.

    Share on FacebookShare on Twitter
  • zameer
    zameer Posts: 1
    via Wordpress

    i have an iphone 3g with firmware 2.0.2 and baseband 02.28.00 my problem is i service everything was fine but when i turn off the phone or go in an out of service area the phone will never get service again .please help.

    Share on FacebookShare on Twitter
  • Ricardo
    Ricardo Posts: 14
    via Wordpress

    Worked a treat on an iphone bought in america on at&t, and now working on an orange sim. If anyone needs any guidance, drop me a line

    Share on FacebookShare on Twitter
  • Anon
    Anon Posts: 63
    via Wordpress

    I am currently running iTunes v. 8.0.2.20 is this version compatible or not. If not, can someone link to 8.0.2. ~Thanks

    Share on FacebookShare on Twitter
  • bd
    bd Posts: 3
    via Wordpress

    Well i was unsuccesful with my macbook but it worked on windows, thanks!

    Share on FacebookShare on Twitter
  • Peter
    Peter Posts: 110
    via Wordpress

    i have t mobile and it won't recon. my card why?

    Share on FacebookShare on Twitter
  • Steve
    Steve Posts: 326
    via Wordpress

    I cant seem to get my phone jailbroken.

    when i connect my phone, Quickpwn picks it up. So i carry on, and it goes onto the screen that has installer, cydia and the pineapple logo. I choose what i want (Cydia and Installer) and when you go to the screen where you are meant to hold down the home button for 5 sec .. it stays on the first step. And doesn't go any further. I thought it might be slow or something, but i waited for like 10 minutes.

    And i have to mention that the first time i tried it. It worked, and i held down home for 5 seconds .. ect. And it said the whole jailbreak thing was successful. And i could see the pineapple man look thing uploading something onto my phone. But when my phone started to reboot. It stayed on the reboot screen. And it wouldnt move from that screen. So i restored it to factory settings. And now when i try quickpwn it doesn't work (what i explained earlier).

    Ive searched the net and theres quite a few people with same kinda problem. Is there a solution?

    Would really appreciate it.

    Sorry if i haven't explained it properly. If you need anymore details let me know.

    Many Thanks.

    Share on FacebookShare on Twitter
  • dritki
    dritki Posts: 1
    via Wordpress

    It works perfect

    Share on FacebookShare on Twitter
  • Malcolm
    Malcolm Posts: 2
    via Wordpress

    Thank you so so much for ur help.. my iphone is jailbroken n unlocked now.. thanks a million!

    Malcolm

    Share on FacebookShare on Twitter
  • Porno Joe
    Porno Joe Posts: 1
    via Wordpress

    yea i was looking at this page when it started but i just did what it said even after it had already started counting and it worked fine

    Share on FacebookShare on Twitter
  • salvador24@earthlink.net
    salvador24@earthlink.net Posts: 1
    via Wordpress

    SO, i was unlocking my iphone 3g. I did everything. It showed me on the computer that everything was completed and wait for the phone to reboot. so i waited for about 30 minutes and nothing happened. it was on the pineapple logo all that long. so i disconnect and played around with it. it wountt turn on no more, and somehow i got this only guy cartoon with his hands up and with the words npebea! I NEED HELP, any one? please

    Share on FacebookShare on Twitter
  • riaz
    riaz Posts: 0
    via Wordpress

    HI guys thanks for the instructions. it was done with ease thank you once again

    Share on FacebookShare on Twitter
  • Sisom
    Sisom Posts: 1
    via Wordpress

    QuickPwn is not recognizing my phone? I have Firmware 2.2 (5G77) running on an iPhone 3G.

    Not getting the blue arrow. -.- Phone is properly connected.

    Any help would be great.

    Share on FacebookShare on Twitter
  • chinsian
    chinsian Posts: 1
    via Wordpress

    very clear instructions....unlocked in secs...well done!!!

    Share on FacebookShare on Twitter
  • pprabha_karan@yahoo.com
    pprabha_karan@yahoo.com Posts: 1
    via Wordpress

    i am from india..i am able to unlock successfully but still i cannot use the sim card in india..do we still have seperate sim for iphone in india.. can some one advice.. thank you..

    Share on FacebookShare on Twitter
  • iPhoneHacks
    iPhoneHacks Posts: 2,315
    via Wordpress

    Hey Prabha,

    You also need to unlock your iPhone using Dev Team's yellowsn0w app after jailbreaking your iPhone.

    You can checkout our step by step guide for more details:
    http://www.iphonehacks.com/2009/01/unlock-3g-guide.html

    Share on FacebookShare on Twitter
  • rabeck4@hotmail.com
    rabeck4@hotmail.com Posts: 1
    via Wordpress

    My Iphone 3G says it's running 2.2.1 (5H11) with modem firmware 02.30.03 will this work for my devise or not?

    Share on FacebookShare on Twitter
  • m scott
    m scott Posts: 1
    via Wordpress

    I followed these instructions and it all worked fine. Apart from my Iphone now has no signal, so i cannot make calls or send texts. I'm in the UK on O2 if that makes a difference.

    Share on FacebookShare on Twitter
  • iPhoneHacks
    iPhoneHacks Posts: 2,315
    via Wordpress

    Hey scott,

    You need to follow our step by step guide to unlock iPhone 3G, this only
    jailbreaks it, the next step is to unlock it. Here is the link to the guide
    for your reference:
    http://www.iphonehacks.com/2009/01/unlock-3g-guide.html

    Share on FacebookShare on Twitter